RPS III – Remote Power Switch Instructions

Instructions Page 1 2 3

The LED Status Lights:

The LED Status Lights indicate the telephone line status and the status of the power outlets.
1) The Telephone Off Hook LED will be RED when a telephone call is in progress and the phone link is off hook / picked up.
2) Power A LED will glow Green when the power is activated to Power Port A. It will glow Red when the power is not being supplied to the port. 3) Power B LED will glow Green when the power is activated to Power Port B.
It will glow Red when the power is not being supplied to the port.

Circuit Breaker Reset :

The RPS III has a 15 Amp resettable circuit breaker to protect against overload. Please pay special attention that the devices you have plugged into the RPS Unit does not exceed the 15 AMP limit of the device. Note that each individual port can handle a maximum of 8 amps.